Configuring DNS Services - Plesk 12.5

View Default Records

To view the default records in the server-wide DNS template:

  1. Log into Plesk as the admin user.
  2. From the left-hand navigation menu, navigate to the Server Management section and select Tools & Settings.
  3. Under the General Settings column, click DNS Template.

All resource record templates will be displayed. The <ip> and <domain> templates are automatically replaced in the generated zone with real IP addresses and domain names.

Add a New Resource Record

To add a new resource record to the server-wide DNS template:

  1. From the left-hand navigation menu in Plesk, navigate to the Server Management section and select Tools & Settings.
  2. Under the General Settings column, click DNS Template.
  3. Click Add DNS Record.
  4. Select the resource record type and specify the record properties as desired.
    Note: You can use <ip> and <domain> templates that will be replaced in the generated zone with real IP addresses and domain names. You can also use a wildcard symbol (*) to specify any part of the domain name; or you can specify the exact values you need.
  5. Click OK.

Remove a Resource Record

To remove a resource record from the server-wide DNS template:

  1. From the left-hand navigation menu in Plesk, navigate to the Server Management section and select Tools & Settings.
  2. Under the General Settings column, click DNS Template.
  3. Select the check box for the record template you wish to remove and click Remove.
  4. Confirm removal and click OK.

Change SOA Record Settings

To change the Start of Authority (SOA) record settings in the server-wide DNS template:

  1. From the left-hand navigation menu in Plesk, navigate to the Server Management section and select Tools & Settings.
  2. Under the General Settings column, click DNS Template.
  3. Click SOA Records Template.
  4. Specify the desired values (TTL, refresh, retry, expire & minimum).
  5. Check the box  next to  *
  6. Click OK.

The new SOA record parameters will be set for newly created domains.

Value Meanings

  • TTL - This is the amount of time that other DNS servers should store the record in a cache. The panel sets the default value of one day.
  • Refresh - This is how often the secondary name servers check with the primary name server to see if any changes have been made to the domain's zone file. The panel sets the default value of three hours.
  • Retry - This is the time a secondary server waits before retrying a failed zone transfer. This time is typically less than the refresh interval. The panel sets the default value of one hour.
  • Expire - This is the time before a secondary server stops responding to queries, after a lapsed refresh interval where the zone was not refreshed or updated.The panel sets the default value of one week.
  • Minimum - This is the time a secondary server should cache a negative response. The Panel sets the default value of three hours.